How to Remove a GPS Tracker with Engine Shut-Off Feature
In recent years, GPS trackers with motor shutdowns have become popular for vehicle safety and fleet management. Although these devices provide great protection, there may be situations where you need to remove one from the vehicle. Whether you turn on a new tracker or have other reasons to remove it, here is a step-by-step guide to safely uninstall the GPS tracker with a shut-off feature.
Understand GPS tracker with engine shutdown
GPS trackers with motor shutdown allow car owners to disable the engine at a distance when it comes to theft or unauthorized use. These devices are usually connected to the ignition systems and batteries of the vehicle, making the standard GPS trackers a little more complicated.
Step-by-step guide to remove GPS tracker
1. Find GPS tracker
The first step is to identify the location of the cabinet in your vehicle. General locations include:
- Under the dashboard
- Near OBD-II port
- Inside the engine well
- Behind him gloves
- Under seats
2. Dispose of the vehicle battery.
Since the GPS tracker is wired into the electrical system, you ensure discontinuation of the vehicle battery when removing the device. Follow these steps:
Close the ignition.
- Find the car battery (usually in the engine well or trunk).
- Use a wrench to disconnect the negative terminal (-), followed by a positive terminal (+).
3. Identify GPS Tracker Wiring
Most GPS trackers with a shutdown of motors have the following connections:
- Electrical wiring (connected to vehicle battery)
- Ignition cords (connected to ignition system)
- Underground cord
- Relay wire (used for motor shutdown control)
4. Remove GPS tracker
Disconnect the device: If the tracker is connected to the OBD-II port, just pull it out.
Cut the wires (if necessary): If the tracker hardens, you may need to cut or separate the wires carefully.
Remove the relay connection: If the tracker is connected to the fuel pump or ignition system through a relay, make sure you connect the original cord to restore the functionality of the engine.
5. Connect the vehicle battery again.
When the tracker is removed and all the wires are restored correctly, you must connect the car battery by attaching the first positive terminal (+) after the negative terminal (-).
6. Test the vehicle.
Before you kill the road, you can turn on the ignition and start the engine to make sure everything works properly. Look for any error message on the dashboard.
Final thoughts
Removing a GPS tracker with the motor shutdown function requires careful handling, especially when vehicles handle wiring. If you are unsure of the procedure, it is best to consult a professional mechanic or electrician on motor vehicles for a safe and appropriate removal. Always check that the antenna and fuel system of your vehicle work properly before driving.
By following these steps, you can safely remove a GPS tracker and restore the vehicle in its original state.
